Cisco 15216 EDFA2

FINAL DRAFT - CISCO CONFIDENTIAL
9-30
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.21 REPT EVT DWDM / REPT EVT ENV / REPT EVT EQPT
Command REPT EVT DWDM or REPT EVT ENV or REPT EVT EQPT
Reports autonomous events. Reports when an event is logged.
Syntax
<sid> <date> <time>
A <atag> REPT EVT <ccm>
"<aid>:<condtype>,<condeff>,<ocrdat>,<ocrtm>,,,,:<conddescr>"
;
Example 9-23 REPT EVT DWDM Message
Amp01 2001-06-18 14:48:44
A 141 REPT EVT DWDM
"1:CTRLMODE1,TC,6-18,14-48-44,,,,:\"Pump1 Control Mode Changed\""
;
srveff Effect on service. Possible values are:
SA Service affecting.
NSA Non-service affecting.
time hh:mm:ss Time of origination of TL1 message.
Table 9-27 REPT ALM EQPT Syntax Description (continued)
Parameter Syntax Description