Cisco 2332TQ - Using a Fabric Extender with a Cisco Nexus 7000 Series Switch

1-2
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter 1 Overview
Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
All of the Cisco Nexus 2000 Series FEXs are 1 RU high and require 19-inch racks for installation. For
more information about the dimensions and weights of each FEX chassis, its power supplies, and fan
modules, see Physical Specifications, page B-5.
The following sections describe the Cisco Nexus 2000 Series FEXs and their components:
• Power Supply and Fan Modules, page 1-5
• Ports and Connectors, page 1-7
• Chassis Features, page 1-7
Using a Fabric Extender with a Cisco Nexus 7000 Series
Switch
This section describes the Cisco Nexus fabric extenders (FEXs) supported by the Cisco Nexus 7000
Series switches. For information about supported FEXs provided by other companies (B22 FEXs), see
the documentation provided by those companies.
To see which FEXs are supported by the Cisco Nexus 7000 switches, see Table 1-2.
Cisco Nexus 2332TQ X
Cisco Nexus 2248TP-E X
Cisco Nexus 2248TP X
Cisco Nexus 2248PQ X
Cisco Nexus 2232TM-E X
Cisco Nexus 2232TM X
Cisco Nexus 2232PP X
Cisco Nexus 2224TP X
Cisco Nexus 2148T X
B22IBM X
B22HP X
B22F (Fujitsu) X
B22DELL X
Table 1-1 FEXs Supported by Cisco Nexus 5000 and 6000 Series Switches (continued)
FEX Model Cisco Nexus 5000 and 6000 Series Switches
Table 1-2 FEXs Supported by Cisco Nexus 7000 Series Switches
FEX Model Cisco Nexus 7000 Series Switch
1 2
Cisco Nexus 2348UPQ X
Cisco Nexus 2348TQ X
Cisco Nexus 2348TQ-E —
Cisco Nexus 2332TQ —
Cisco Nexus 2248TP-E X