EasyManua.ls Logo

Cisco 3905 - Adjust the Handset Rest

Cisco 3905
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ISO 9001:2015 Certified ………….……..….....Soaring Heights in Transforming Industry and Economy
Footstand
The Cisco Unified IP Phone 3905 has a foldable footstand. When the footstand is unfolded, it
gives the phone an elevated viewing angle.
Adjust the Handset Rest
If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the
receiver does not slip out of the cradle.
Procedure
Step 1 Remove the handset from the cradle and pull the plastic tab from the handset
rest.
Step 2 Rotate the tab 180 degrees.
Step 3 Hold the tab between two fingers, with the corner notches facing you.
Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot.
An extension protrudes from the top of the rotated tab.

Other manuals for Cisco 3905

Related product manuals