SPA 500 Series IP Phone Advanced User Guide 8 | Page
Figure 2 Cisco SPA 500s Attendant Module
The Cisco SPA 500S is a 32-button attendant console for the Cisco SPA 500 Series IP Phone,
providing 32 three-color (red, green, and amber) programmable LEDS, with support for
Broadsoft Busy Lamp Field and Line Monitoring. The Cisco SPA 500S attaches to the IP phone
with the attachment arm provided (not shown). It obtains power directly from the IP phone and
does not require a separate power supply. Two Cisco SPA 500S units can be attached to a single
IP phone to monitor a total of 64 separate lines.
Caring
for
Your
Phone
The Cisco SPA 500 Series IP Phones are electronic devices that should not be exposed to
excessive heat, sun, cold, or water. To clean the equipment, use a slightly moistened paper or
cloth towel. Do not spray or pour cleaning solution directly onto the hardware unit.
To Next Page
Loading...
Need help?
General
