3-4
Cisco AnyConnect VPN Client Administrator Guide
OL-12950-012
Chapter 3 Installing the AnyConnect Client and Configuring the Security Appliance with ASDM
Figure 3-4 Enable SSL VPN Client Check Box
Step 6
Configure a method of address assignment. You can use DHCP, and/or user-assigned addressing. You
can also create a local IP address pool and assign the pool to a tunnel group.
To create an IP address pool, choose Netw
ork (Client) Access > Address Management > Address
Pools. Click Add. The Add IP Pool dialog appears (Figure 3-5).