Cisco 6000 series Site Planning Guide

iii
Cisco Network Convergence System 6000 Series Routers Site Planning Guide
OL-29236-02
CONTENTS
Preface v
CHAPTER 1 Cisco NCS 6008 Chassis 1-1
Chassis Components 1-4
Chassis Slot Numbers 1-5
Overview of Site Planning Steps 1-7
CHAPTER 2 Power and Cooling 2-1
Chassis Power System 2-1
General Power and Grounding Requirements 2-1
Bonding and Grounding Guidelines 2-2
DC Power Systems 2-4
DC Power Requirements 2-4
DC Input Power Cables 2-5
AC Power Systems 2-7
AC Power Requirements 2-7
AC Power Tray Wiring 2-8
Converting 3-Phase AC to Single-Phase AC 2-13
Chassis Cooling System 2-16
Facility Cooling Requirements 2-17
CHAPTER 3 System Specifications 3-1
Chassis Specifications 3-2
Component Specifications 3-3
Environmental Specifications 3-4
CHAPTER 4 Site Planning Considerations 4-1
Basic Site and Installation Planning 4-1
Aisle Spacing and Maintenance Access Floor Plan 4-2
Drill Hole Template 4-3
Power and Cooling Requirements 4-3
System Console 4-3
Cable Management 4-3

Cisco 6000 series Specifications

General

Category	Network Router
Model	Cisco 6000 series
Routing Protocols	BGP, OSPF, EIGRP, IS-IS, RIP
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Ports	Varies by model
Power Supply	Redundant power supply options
Dimensions	Varies by model
Weight	Varies by model
Redundancy	Power supplies, fans, route processors
Operating System	Cisco IOS