Cisco 6000 series Site Planning Guide

vii
Cisco Network Convergence System 6000 Series Routers Site Planning Guide
OL-29236-02
Related Documentation
For complete planning, installation, and configuration information, see the following documents:
• Cisco Network Convergence System 6000 Series Routers Site Planning Guide
• Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
• Regulatory Compliance and Safety Information for the Cisco Network Convergence System 6000
Series Routers
Changes to This Document
Table 1 lists the technical changes made to this document since it was first created.
Obtaining Additional Information and Support
For information on obtaining documentation, submitting a service request to obtain support, and
gathering additional information, see the monthly What’s New in Cisco Product Documentation, which
also lists all new and revised Cisco technical documentation:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS)
feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds
are a free service, and Cisco currently supports RSS version 2.0.
Table 1 Changes to This Document
Revision Date Change Summary
OL-29236-01 September 2013 Initial release of this document. This document introduces
the Cisco NCS 6008 8-Slot Line Card Chassis.
OL-29236-02 January 2014 Updated Appendix B to include 60-Port 10Gbps Line Card
with SFP+ Optics Module (Lean Core [NC6-60X10GE-L-S]
and Multi-Service Core [NC6-60X10GE-M-S]. Updated
content and graphics based on documentation feedback from
the September release.

Cisco 6000 series Specifications

General

Brand	Cisco
Model	6000 series
Category	Network Router
Language	English