CHAPTER
3-1
Cisco Network Convergence System 6000 Series Routers Site Planning Guide
OL-29236-02
3
System Specifications
This appendix contains tables that list the specifications for the main components of the Cisco NCS 6008
chassis.
• Chassis Specifications, page 3-1
• Power Specifications, page 3-2
• Environmental Specifications, page 3-3
• Regulatory, Compliance, and Safety Specifications, page 3-4
Chassis Specifications
Table 3-1 Cisco NCS 6008 Chassis Specifications
Supported Cards and Modules
Up to eight line cards
Six Fabric Cards
Two Route Processor cards
Two fan trays
Chassis Dimensions
Height 81.0 in. (205.7 cm) as shipped
84.0 in. (213.4 cm) as installed with the top cap
(The top cap in the cosmetic package attaches to the top of the
chassis)
Width 23.6 in. (59.9 cm)
35.3 in. (89.7 cm) as installed with optional AC PDU brackets on
each side of the chassis (Cisco PID PDU bracket: NCS-PDU=BRKT,
NCS-PDU-BRKT=spare)
Depth 39.0 in. (99.1 cm) without exterior cosmetics
42.0 in. (106.7 cm) with all exterior cosmetics
Aisle spacing To install chassis (front): 48 in. (122 cm)
To service FRUs (front): 31.7 in. (80.5 cm)
To service FRUs (rear): 14.0 in. (35.6 cm)
Weights
To Next Page
Loading...
Need help?
General
