Cisco 6000 series Site Planning Guide

B-4
Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide
OL-29236-02
Appendix B System Product IDs
Accessory Product IDs
Accessory Product IDs
Table B-4 Cisco NCS 6008 Accessory Product IDs
Component Product ID Description
Drill hole template NC6-DRILLTEMP= Cisco NCS 6008 chassis drill hole template (spare)
Chassis filter NC6-5XFILTER= Cisco NCS 6008 chassis air filter, 5-pack (spare)
Vertical cable trough NC6-TROUGH= Cisco NCS 6008 vertical cable trough (spare)
Chassis lift dolly NCS-LIFT
NCS-LIFT= (spare)
Cisco NCS chassis lift dolly
Lift upgrade NCS-LIFT-BRKT= Cisco CRS lift upgrade to Cisco NCS chassis (spare)
AC/DC PM slot cover A9K-PEM-V2-FILR AC/DC PM slot cover
Line card slot cover NC6-LC-BLANK Cover for empty line card slot

Cisco 6000 series Specifications

General

Category	Network Router
Model	Cisco 6000 series
Routing Protocols	BGP, OSPF, EIGRP, IS-IS, RIP
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Ports	Varies by model
Power Supply	Redundant power supply options
Dimensions	Varies by model
Weight	Varies by model
Redundancy	Power supplies, fans, route processors
Operating System	Cisco IOS