B-1
Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide
OL-29236-02
APPENDIX
B
System Product IDs
This appendix provides information about the PIDs for the Cisco NCS 6008 chassis and its components.
• Component Product IDs, page B-1
• Line Card Product IDs, page B-3
• Cosmetic Product IDs, page B-3
• Accessory Product IDs, page B-4
These tables list the components that make up the routing system, their PIDs (part numbers used to order
the components), and descriptions.
Note In the following tables, an equals sign (=) at the end of the PID indicates that the component can be
ordered as a spare. For those components, be sure to include the equals sign as part of the PID.
Note Although this appendix provides PIDs for routing system components, the Cisco online ordering and
pricing tool has the most up-to-date information on the routing system and PIDs. You can access the
ordering tool at the following URL (CCO login required), and enter a search term such as “NCS” to view
a list of components: http://www.cisco.com/cgi-bin/front.x/pricing.
Component Product IDs
Table B-1 lists the PIDs for components in the Cisco NCS 6008 chassis.
Table B-1 Cisco NCS 6008 Chassis Component Product IDs
Component Product ID Description
8-slot line card chassis NCS-6008
NCS-6008= (spare)
Cisco NCS 6008 chassis
8-slot routing system NCS-6008-SYS-S Cisco NCS 6008 chassis system
(includes two RPs, six FCs, two FTs, and six PTs)
Fabric card NC6-FC
NC6-FC= (spare)
Cisco NCS 6008 FC
Route processor card NC6-RP
NC6-RP= (spare)
Cisco NCS 6008 RP card
To Next Page
Loading...
Need help?
General
