Use WebDialer with Cisco Directory
Procedure
Step 1
Sign in to your User Options web pages.
Step 2
Select User Options > Directory and search for a coworker.
Step 3
Select the number that you want to dial.
Step 4
If this is your first time using WebDialer, review the preferences on the Make Call window.
Step 5
Select Dial.
The call is now placed on your phone.
Step 6
To end a call, select Hang up or hang up your handset.
Use WebDialer with Another Online Corporate Directory
Procedure
Step 1
Sign in to a WebDialer-enabled corporate directory and search for coworkers.
Step 2
Select the number that you want to dial.
Step 3
When prompted, enter your user ID and password.
Step 4
If this is your first time using WebDialer, review the preferences on the Make Call window.
Step 5
Select Dial.
The call is now placed on your phone.
Step 6
To end a call, select Hang up or hang up your handset.
Change WebDialer Preferences
Procedure
Step 1
Initiate a call using WebDialer to access the Make Call window.
The Make Call window displays the first time that you use WebDialer (after you select the number that you
want to dial).
Step 2
Select one of the following options from the Make Call window:
•
Preferred language: Determines the language used for WebDialer settings and prompts.
•
Use preferred device: Identifies the Cisco Unified IP Phone (calling device) and directory number (calling
line) that you use to place WebDialer calls.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
79
Calling Features
Use WebDialer with Cisco Directory
To Next Page
Loading...
Need help?
General
