Cisco 6921

Change Voice Message Indicator Setting Per Line
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
(Optional) If you have more than one directory number (line) assigned to your phone, select a line from the
Line drop-down menu.
Step 5
In the Message Waiting Lamp area, choose from various settings.
Typically, the default message waiting setting prompts your phone to display a steady red light from the
handset light strip to indicate a new voice message.
Step 6
Select Save.
Change Audible Voice Message Indicator Setting Per Line
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5
In the Audible Message Waiting Lamp area, choose the desired setting.
Step 6
Select Save.
Change Ring Settings Per Line
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5
In the Ring Settings area, set the option for Ring Setting (Phone Idle) and Ring Setting (Phone Active) from
the drop-down menus.
The options are:
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0
(SCCP and SIP)
84
User Options
Line Settings