8-4
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-03
Chapter 8 Troubleshooting the System
Understanding show Command Responses
show cable qos
profile
To display type of service (ToS) specifications, use the show cable qos profile
command in privileged EXEC mode. Information includes upstream packet
discards, errors, error-free packets, correctable and uncorrectable errors, noise,
and micro-reflection statistics.
Following is a response to the show cable qos profile command. The display
shows ToS specifications:
Router# show cable qos profile
Service Prio Max Guarantee Max Max tx TOS TOS Create
B
class upstream upstream downstream burst mask value
by
priv
> bandwidth bandwidth bandwidth
enab
1 0 0 0 0 0 0x0 0x0
cmts(r)
no
2 0 64000 0 1000000 0 0x0 0x0
cmts(r)
no
3 0 1000 0 1000 0 0x0 0x0 cmts
no
4 3 256000 0 512000 0 0x0 0x0 cm
no
5 5 1000000 0 10000000 0 0x0 0x0 cm
no
6 3 256000 0 512000 0 0x0 0x0 cm
yes
Note The “r” in the “Create by” column means that the first two classes of
service the CMTS creates are reserved for CMs that are not online.
The optional argument n can be used to display a specific profile.
Command Purpose
To Next Page
Loading...
