1-11
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-05
Chapter 1 Overview of Cisco uBR7200 Series Software
Cisco uBR7200 Series Chassis Overview
Supported Hardware on the Cisco uBR7200 Series
Table 1-5 provides a quick overview of the major hardware features of the Cisco uBR7200 series routers.
Note Earlier release notes stated that the NPE-175 was also supported on the Cisco uBR7200 series routers.
Because the NPE-175 has reached its end of life and was never made available for order on the Cisco
uBR7200 series routers, it has been removed from the table.
The UBR7200-NPE-G1 does not require that an I/O controller be installed. Refer to the Cisco uBR7200
Series Software Release Notes on Cisco.com:
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/release/notes/12_3bc/123BCu72.html
Network Processing Engines
The Cisco uBR7246 VXR supports the following Network Processing Engines (NPEs):
• UBR7200-NPE-G1
• NPE-225
• NPE-300
• NPE-400
The Cisco uBR7223 and the Cisco uBR7246 support the following Network Processing Engines (NPE) :
• NPE-150
• NPE-200
• NPE-225
Note The NPE-300 and NPE-400 are not supported on the Cisco uBR7223 and the Cisco uBR7246. The
NPE-150 and NPE-200 are not supported on the Cisco uBR7246 VXR.
Ta b l e 1-5 Cisco uBR7200 Series Hardware Overview
Supported Hardware Cisco uBR7246 VXR Cisco uBR7246 Cisco uBR7223
Network Processing Engines One of the following:
• UBR7200-NPE-G1
• NPE-225
• NPE-300
• NPE-400
One of the following:
• NPE-150
• NPE-200
• NPE-225
One of the following:
• NPE-150
• NPE-200
• NPE-225
I/O Controllers One of the following:
• UBR7200-I/O
• UBR7200-I/O-FE
• UBR7200-I/O-2FE/E
One of the following:
• UBR7200-I/O
• UBR7200-I/O-FE
One of the following:
• UBR7200-I/O
• UBR7200-I/O-FE
Network Interface Port Adapters Up to two Up to two One
Cable Interface Line Cards Up to four Up to four Up to four
Removable Power Supplies Up to two Up to two One
PCMCIA Slots Two Two Two
To Next Page
Loading...
Need help?
General
