IN-1
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-02
INDEX
A
access control lists (ACL) 1-108
COPS Intercept support 1-72
acronyms, list of 1-14
address
CM upstream address verification 5-4
downstream helper address 3-7
dynamic IP address allocation 1-32
addresses, MAC 1-17
admission control 1-86, 3-12, 3-13
Advanced-mode DOCSIS Set-Top Gateway Issue
1.2
1-99
algorithm
amplitude averaging 8-7
automatic dynamic backoff 3-19
downstream rate limiting 3-10
dynamic backoff 5-7
dynamic contention algorithm 5-6
dynamic map advance 5-7
upstream rate limiting 3-26
amplitude averaging 8-7
ARP (Address Resolution Protocol)
debug cable arp command 8-11
downstream requests 3-2, 3-3
host-to-host communication, activating Proxy
ARP
3-28
AutoInstall
facility overview 1-31
Autoinstall facility
configuring Cisco uBR7200 series with 2-10
B
backoff values, upstream 3-19, 3-20
bandwidth management 1-33
Baseline Privacy Interface (BPI)
BPI network example 4-2
CM communication with 4-3
configuration files 2-29
debug cable keyman command 8-12
debug cable privacy command 8-13
differentiating traffic streams 4-3
enabling 4-3
encrypted data on the cable TV network 4-3
encryption and encrypted key exchange 1-49
key management 4-2
overview 4-1
Baseline Privacy Interface Plus (BPI+)
overview 4-4
boot
reboot router 2-9
broadband Internet access
configuring 6-1
overview 6-1
recommended configuration 6-2
sample configuration file 6-3
broadcast echo 3-34
C
cable commands
cable bundle master 3-31
cable device 1-129
cable dhcp-giaddr 1-59
To Next Page
Loading...
