Index
IN-2
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-02
cable downstream annex 3-9
cable downstream channel-id 3-5
cable downstream frequency 3-5
cable downstream if-output 3-4, 8-9
cable downstream interleave-depth 3-8
cable downstream modulation 3-9
cable downstream override 1-123
cable downstream rate-limit token-bucket 3-6, 3-10
cable helper-address 3-7
cable host 1-129
cable insertion-interval 1-141
cable intercept 1-81
cable map-advance 1-87
cable modem remote-query 1-111
cable modulation-profile 1-58, 2-22
cable monitor 1-88
cable registration-timeout 5-6
cable-source verify dhcp 1-47
cable spectrum-group 2-22
cable sync-interval 5-9
cable upstream 3-16
cable upstream admission-control 3-13
cable upstream channel-width 3-21
cable upstream data-backoff 1-141, 3-19
cable upstream differential-encoding 3-13
cable upstream fec 3-14
cable upstream freq-adj averaging 8-8
cable upstream frequency 1-16, 3-22
cable upstream frequency-adjust averaging 3-15
cable upstream minislot-size 3-25
cable upstream modulation-profile 1-121
cable upstream power-adjust 3-16, 8-7
cable upstream power-level 3-24
cable upstream range backoff 1-141
cable upstream rate-limit 3-18
cable upstream rate-limit token-bucket 3-26
cable upstream scrambler 3-17
cable upstream time-adjust 3-17
cable interface
configuring 3-1
downstream, configuring 3-2
Setup facility 1-31
upstream, configuring 3-11, 3-22
cable interface line card
logical interface numbering 1-15
slot numbering 1-15
cable modem
authentication
activating 5-2
troubleshooting 5-3
verifying 5-2
configuring cable modem interface 3-1
configuring registration timeout 5-6
counters, clearing 5-5
dynamic contention algorithms 5-6
hosts, configuring maximum configurable hosts 5-8
insertion interval 5-3, 5-6
registration timeout, configuring 5-6
reset, clearing 5-5
sync message interval, configuring 5-9
troubleshooting 1-123
troubleshooting, verifying downstream signals 8-6
upstream address verification, activating 5-4
Cable Modem Termination System
see CMTS
Cable Modulation Profile Default Templates 1-58
Cable Monitor Enhancements 1-73
channel ID, downstream
configuring 3-5
verifying 3-6
channel width, upstream
configuring 3-21
Cisco IOS
features 1-22
Cisco Network Registrar, see CNR
clear commands
clear cable host 1-129
clear cable modem counters 5-5
To Next Page
Loading...
