EasyManuals Logo

Cisco 7800 Series Manual

Cisco 7800 Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Your phone must be connected to a network and configured to connect to a call control system. The phones
support many functions and features, depending on the call control system. Your phone might not have all
functions available, based on the way your administrator has set it up.
When you add features to your phone, some features require a line button. But each line button on your phone
can support only one function (a line, a speed dial, or a feature). If your phone's line buttons are already in
use, your phone won't display any additional features.
To check which phone model you have, press Applications and select Phone information. The Model
number field shows your phone model.
New and Changed Information
New and Changed Information for Firmware Release 12.7(1)
The following table shows the changes made for Firmware Release 12.7(1).
Table 2: Cisco IP Phone 7800 User Guide Revisions for Firmware Release 12.7(1)
Updated SectionRevision
Energy Savings, on page 17
Turn Off the Select Key LED for Energy Save Mode
Updated for Select Key LED and Energy Savings.
Enable Electronic Hookswitch Control on Your PhoneUpdated for E-hook.
Answer a Call Within Your Hunt GroupUpdated for hunt group calls on Call Alert
Erase All Bluetooth PairingsCisco Headset 500 Series Firmware Release 1.5
Change
In certain circumstances, users who dialed a number
that was busy received the reorder tone. With this
release, the user hears the busy tone.
New section Phone Icons, on page 15
General changes
New and Changed Information for Firmware Release 12.6(1)
The following table shows the changes made for Firmware Release 12.6(1).
Table 3: Cisco IP Phone 7800 User Guide Revisions for Firmware Release 12.6(1)
Updated SectionRevision
Share a Network Connection with Your Phone and
Computer, on page 6
Added a section about sharing a network connection
between phone and computer.
New and Changed Information for Firmware Release 12.5(1)SR3
All references into Cisco Unified Communications Manager documentation have been updated to support all
Cisco Unified Communications Manager releases.
Your Phone
2
Your Phone
New and Changed Information

Other manuals for Cisco 7800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7800 Series and is the answer not in the manual?

Cisco 7800 Series Specifications

General IconGeneral
WirelessNo
Video SupportNo
PoEYes, 802.3af/at
Audio Codec SupportG.711, G.722, G.729, iLBC
Network ProtocolsSIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features802.1X, TLS, SRTP
Power OptionsPoE
Headset Port3.5mm
ButtonsLine keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
BluetoothNo
Ethernet SwitchYes, 2-port 10/100/1000
USB PortYes, for headset (7875)

Related product manuals