Get Started with Your New Phone
• Your New Phone, on page 1
• Install Your New Phone (7800 Series) on Webex Calling (formerly Spark Call), on page 1
• Install Your New Phone (8800 Series) on Webex Calling (formerly Spark Call), on page 2
• Install Your New Conference Phone (7832), on page 2
• Complete Your Initial Setup in Cisco Webex Settings, on page 3
• Get an Activation Code, on page 4
• Activate Your Phone Automatically with a QR Code (8845, 8865, and 8865NR), on page 4
• Activate Your Phone Manually, on page 5
• Activate Your Voicemail Account, on page 5
• Voicemail PIN Rules, on page 6
Your New Phone
To start using your new Cisco phone, you will need to follow these steps:
• Install your phone with the components in the box.
• Sign in to Cisco Webex Settings and complete your initial setup.
• Activate your phone.
• Activate your voicemail account.
Install Your New Phone (7800 Series) on Webex Calling
(formerly Spark Call)
Your phone comes with everything you need to power it up, connect it to the network, and set it up on your
desk.
You cannot adjust the Cisco IP Phone 7811 footstand.
To check which phone model you have, press Applications and select Phone information. The Model
number field shows your phone model.
If you'd like to see a graphic overview of these steps, see the Cisco IP Phone 7800 Series Installation Guide.
Get Started with Your New Phone
1
To Next Page
Need help?
General
