When the scan succeeds, your phone registers with the server, and you're ready to make your first call.
Activate Your Phone Manually
If your phone does not have a camera, enter the code on the phone screen to activate it.
You can also press Enter manually to enter the code manually instead of scanning the QR code.
Before you begin
You need the QR code from your welcome message.
If the code from your welcome message has expired, generate an activation code for your device with Cisco
Webex Settings.
Procedure
Step 1 Enter your activation code.
Step 2 Press Continue.
Your phone registers with the server, and you're ready to make your first call.
Activate Your Voicemail Account
When you get your phone, you must complete a few steps to get your voicemail up and running.
Before you begin
Familiarize yourself with the rules for setting your voicemail PIN.
Keep in mind that Cisco Webex users cannot set up a second voicemail account.
Procedure
Step 1 From Cisco Webex Settings, go to My Profile, click More , choose Reset Voicemail PIN, and create a
new PIN.
Step 2 Do one of these actions:
• Desk phones—Press Messages .
• Conference phone—Press Messages.
Step 3 Enter the PIN you created and press #.
This completes the voicemail enrollment process.
Get Started with Your New Phone
5
Get Started with Your New Phone
Activate Your Phone Manually
To Next Page
Loading...
Need help?
General
