The following table shows the changes made for Firmware Release 12.5(1)SR3.
Table 4: Cisco IP Phone 7800 User Guide Revisions for Firmware Release 12.5(1)SR3
Updated SectionRevision
Reset Cisco Headset Settings from Your PhoneAdded support for Reset Headset Settings
Phone Keypad Characters, on page 13New topic
Share a Network Connection with Your Phone and
Computer, on page 6
New topic
New and Changed Information for Firmware Release 12.5(1)SR2
No user guide updates were required for Firmware Release 12.5(1)SR2.
Firmware Release 12.5(1)SR2 replaces Firmware Release 12.5(1) and Firmware 12.5(1)SR1. Firmware
Release 12.5(1) and Firmware Release 12.5(1)SR1 have been deferred in favor of Firmware Release 12.5(1)SR2.
New and Changed Information for Firmware Release 12.5(1)SR1
All references into Cisco Unified Communications Manager documentation have been updated to support all
Cisco Unified Communications Manager releases.
The following table shows the changes made for Firmware Release 12.5(1)SR1.
Table 5: Cisco IP Phone 7800 User Guide Revisions for Firmware Release 12.5(1)SR1
Updated SectionRevision
Connect with Activation Code Onboarding, on page
7
Connect with Activation Code Onboarding
Cisco Headset 560 Series MultibaseCisco Headset 561 and 562 Multibase
New and Changed Information for Firmware Release 12.5(1)
All references into Cisco Unified Communications Manager documentation have been updated to support all
Cisco Unified Communications Manager releases.
The following table shows the changes made for Firmware Release 12.5(1).
Table 6: Cisco IP Phone 7800 User Guide Revisions for Firmware Release 12.5(1)
Updated SectionRevision
Intercom CallsWhisper Paging on Cisco Unified Communications
Manager Express
Audio Path SelectionDisable handset so audio path can be kept on headset
Cisco Headset 500 SeriesCisco Headset 561 and 562
Your Phone
3
Your Phone
New and Changed Information for Firmware Release 12.5(1)SR2