Cisco 7800 Series Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 4 of 30
Note: If you are a Flex plan subscriber, see Appendix A: Flex plan - How to order licenses via Product Upgrade Tool (PUT).
Gather all the device information listed below for all the phones to check the firmware migration eligibility and to generate the
migration licenses. See Appendix C: How to Generate a License File for Firmware Conversion.
Device Information
Example
Importance
PID (Model)
CP-8841-K9=
MUST
VID (Version number)
V03
MUST for 7800 series phones
MAC address
321ABC432DEF
MUST
Serial Number
FCH20100312 / WZP20100113
Recommended
In this guide, we will cover the Cisco Unified Communications Manager (Unified CM)-based approach. This method is intended to further your
understanding of how the entire process works from end-to-end. Following guides have detailed instructions if you wish to use your web /
TFTP server.
Enterprise to MPP conversion guide:
http://cs.co/E2M-guide
MPP to Enterprise conversion guide:
http://cs.co/M2E-guide

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)