Cisco 7800 Series Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 5 of 30
The conversion process involves moving to a transitional firmware load before the final load is installed. The transitional load is where you
enter both the license file and a normal MPP target load to upgrade to. There are separate transitional loads for each migration direction. For
example, there is one firmware load for moving from Enterprise to MPP, and one firmware load for moving from MPP to Enterprise. Likewise,
each migration direction requires a different license file. The conversion direction is reflected inside the license file and in the firmware image
name.
Figure 1. Example MPP_2_ENT License File
Figure 2. Example ENT_2_MPP License File

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)