E911 Geolocation Configuration
E911 Geolocation Configuration
DescriptionParameter
The Universally Unique Identifier (UUID) assigned
to the customer by the emergency call services
provider.
Maximum identifier length is 128 characters. Defaults
to blank.
Company UUID
Encrypted HTTPS phone location request. The request
uses the phone IP addresses, MAC address, Network
Access Identifier (NAI), and chassis ID and port ID
assigned by the network switch manufacturer. The
request also includes the location server name and the
customer identifier.
The server used by the emergency call services
provider responds with an Emergency Response
Location (ERL) that has a location Uniform Resource
Identifier (URI) tied to the user phone IP address.
Defaults to blank.
Primary Request URL
Encrypted HTTPS request sent to the emergency call
services provider's backup server to obtain the user's
phone location.
Defaults to blank.
Secondary Request URL
See Emergency Call Support Terminology, on page 188 for terms that describe emergency call support for
phones.
User
Hold Reminder
DescriptionParameter
Specifies the time delay (in seconds), that a ring splash
is heard on an active call when another call was placed
on hold.
Default: 0
Hold Reminder Timer
Specifies the volume of the timer ringtone.Hold Reminder Ringtone
Call Forward
DescriptionParameter
Select Yes to enable call forwarding.Cfwd Setting
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
294
Cisco IP Phone Troubleshooting
E911 Geolocation Configuration
To Next Page
Loading...
Need help?
General
