Cisco 7841 Administration Guide

Figure 1: Cisco IP Phone 7800 Series Buttons and Features
Indicates whether you have an incoming call (flashing red)
or a new voice message (steady red).
Handset and Handset light strip1
Access your phone lines, features, and call sessions.
For more information, see Softkey, Line, and Feature
Button on page 13.
Programmable feature buttons and line
buttons
2
Access functions and services.
For more information, see Softkey, Line, and Feature
Button on page 13.
Softkey buttons3
Navigation ring and Select button. Scroll through
menus, highlight items, and select the highlighted item.
Navigation cluster4
Hold/Resume Place an active call on hold and resume
the held call.
Conference Create a conference call.
Transfer Transfer a call.
Hold/Resume, Conference, and
Transfer
5
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
27
About the Cisco IP Phone
Buttons and Hardware

Cisco 7841 Specifications

General

Ethernet Switch	Yes
Lines	4
Headset Port	Yes
Wall Mountable	Yes
Display	3.5-inch grayscale display
Audio	Wideband audio
PoE	IEEE 802.3af
Speakerphone	Full-duplex
Ethernet Ports	2 x 10/100/1000
Headset Jack	RJ9
Protocols	SIP
Codec Support	G.711, G.722, G.729, iLBC
Mounting	Desk or wall
Weight	1 kg