Cisco 7912G - Deleting Records in the Phone Logs

Chapter 3 Placing a Call and Other Basic Phone Tasks
Using the Phone Logs
3-16
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
78-15080-02
Step 4 To place a call from any directory, use the Navigation button to select the call
record, then lift the handset or press the Dial softkey.
Note You might need to use the EditDial softkey to add digits to the front of
the number. For example, if the call was from an outside, long-distance
caller, you might need to add the digits 9-1 to the front of the number.
Then, press the Dial softkey.
Deleting Records in the Phone Logs
To delete all records in the Missed, Received, or Placed directories, from the
Directories menu, use the Navigation button to select any of these directories and
press the Clear softkey.
To delete a particular record in the Missed, Received, or Placed directories, follow
these steps:
Procedure
Step 1 Press the Menu button.
Step 2 Use the Navigation button to select Directories and then press the Select softkey.
Step 3 Use the Navigation button to select the directory containing the record to delete
and press the Select softkey.
Step 4 Use the Navigation button to select the record to delete
Step 5 Press the Delete softkey.