Appendix A Troubleshooting Your Phone
Accessing Status Data
A-2
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
78-15080-02
Step 3 Use the Navigation button to select Network Configuration, and then press the
Select softkey.
From here, you can use the Navigation button to view your Network
Configuration information.
Step 4 Press the Cancel softkey to exit the Network Configuration menu.
Accessing Status Data
Your network administrator or technician might want to access status information
to monitor the performance of your phone.
To access status data, follow these steps:
Procedure
Step 1 Press the Menu button.
Step 2 Use the Navigation button to select Settings, and then press the Select softkey.
Step 3 Use the Navigation button to select Status, and then press the Select softkey.
Step 4 Use the Navigation button to select the item that you want to view and press the
Select softkey.
From here, you can use the Navigation button to view Status Messages, Network
Statistics, and Firmware Versions for your phone.
To Next Page
Loading...
