5-5
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Call pickup Allows users to redirect a call that is ringing on another
phone within their pickup group to their phone.
You can configure an audio and/or visual alert for the
primary line on the phone. This alert notifies the users
that a call is ringing in their pickup group.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Call Pickup
Configuration” chapter.
Call recording Allows a supervisor to record an active call. The user
might hear an intermittent tone (beep tone) during a call
when it is being recorded.
Note The intercom feature is disabled when a call is
being monitored or recorded.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Monitoring and
Recording” chapter.
Call waiting Indicates (and allows users to answer) an incoming call
that rings while on another call. Displays incoming call
information on the phone screen.
For more information, refer to the Cisco
Unified Communications Manager
Administration Guide, “Cisco Unified
IP
Phone Configuration” chapter.
Caller ID Displays caller identification such as a phone number,
name, or other descriptive text on the phone screen.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Directory
Number Configuration chapter” chapter.
• Cisco Unified Communications Manager
System Guide, “Understanding Route
Plans” chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Call
Display Restrictions” chapter.
Caller ID Blocking Blocks a user’s phone numbers or e-mail addresses. For more information, refer to:
• Cisco Unified Communications Manager
System Guide, "Understanding Route
Plans" chapter.
• Cisco Unified Communications Manager
Administration Guide, "Directory
Number Configuration" chapter.
• Cisco Unified Communications Manager
Administration Guide, "SIP Profile
Configuration" chapter.
Cisco Unified
Communications
Manager Assistant
Enables managers and their assistants to work together
more effectively by providing a call-routing service,
enhancements to phone capabilities for the manager,
and desktop interfaces that are primarily used by the
assistant.
For more information, refer to the Cisco
Unified
Communications Manager Features
and Services Guide, “Cisco Unified
Communications Manager Assistant With
Proxy Line Support” and “Cisco Unified
Communications Manager Assistant With
Shared Line Support” chapters.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
Need help?
General
