5-6
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Client matter codes
(CMC)
(SCCP phones
only)
Enables a user to specify that a call relates to a specific
client matter.
For more information, refer to: the Cisco
Unified
Communications Manager Features
and Services Guide, “Client Matter Codes
and Forced Authorization Codes” chapter.
Computer
Telephony
Integration (CTI)
Applications
A computer telephony integration (CTI) route point can
designate a virtual device to receive multiple,
simultaneous calls for application-controlled
redirection.
For more information, refer to the Cisco
Unified Communications Manager
Administration Guide, "CTI Route Point
Configuration" chapter.
Conference • Allows a user to talk simultaneously with multiple
parties by calling each participant individually.
Conference features include Conference, Join,
cBarge, and Meet-Me.
• Allows a non-initiator in a standard (ad hoc)
conference to add or remove participants; also
allows any conference participant to join together
two standard conferences on the same line.
• For more information, refer to
Cisco
Unified Communications
Manager System Guide,
“Cisco
Unified IP Phones” and
“Conference Bridges” chapters.
• The service parameter, Advance Adhoc
Conference, (disabled by default in
Cisco Unified Communications Manager
Administration) allows you to enable
these features.
Note Be sure to inform your users whether
these features are activated.
Configurable call
forward display
Allows you to specify information that appears on a
phone when a call is forwarded. This information can
include the caller name, caller number, redirected
number, and original dialed number.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Directory
Number Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP
Phones” chapter.
Directed Call Park Allows a user to transfer an active call to an available
directed call park number that the user dials or speed
dials.
A Call Park BLF button indicates whether a directed call
park number is occupied and provides speed-dial access
to the directed call park number.
Note If you implement Directed Call Park, avoid
configuring the Park softkey. This prevents users
from confusing the two Call Park features.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, “Call Park and Directed Call
Park” chapter.
Direct transfer
(SCCP phones
only)
Allows users to connect two calls to each other (without
remaining on the line).
For more information, refer to Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Distinctive Ring Users can customize how their phone indicates an
incoming call and a new voice mail message.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Custom Phone Rings"
chapter
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
Need help?
General
