Cisco 7945G - Page 115

5-11
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Multiple calls per
line appearance
Each line can support multiple calls. Only one call can
be active at any time; other calls are automatically
placed on hold.
Refer to Cisco Unified Communications
Manager Administration Guide, “Directory
Number Configuration” chapter.
Music on hold Plays music while callers are on hold. For more information refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Music On Hold”
chapter.
Mute Mutes the microphone from the handset or headset. Requires no configuration.
Onhook call
transfer
Allows a user to press a single Transfer softkey and then
go onhook to complete a call transfer.
For more information refer to Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Onhook predialing Allows a user to dial a number without going off hook.
The user can then either pick up the handset or press the
Dial softkey.
For more information refer to Cisco Unified
IP Phone Guide, “Basic Call Handling”
chapter.
Other group pickup Allows a user to answer a call ringing on a phone in
another group that is associated with the user's group.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Call Pickup
Configuration” chapter.
Phone secure web
access
Cisco Unified IP Phones can now securely access the
web with the use of a phone trust store called
“phone-trust.”
Cisco Unified Communication Manager
Security Guide, “Security Overview” chapter.
Presence-enabled
directories
Allows a user to monitor the call state of another
directory number (DN) listed in call logs, speed dials,
and corporate directories. The Busy Lamp Field (BLF)
for the DN displays the call state.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, “Presence” chapter.
Private Line
Automated
Ringdown (PLAR)
(SIP phones only)
The Cisco Unified Communications Manager
administrator can configure a phone number that the
Cisco Unified
IP Phone dials as soon as the handset
goes off hook. This can be useful for phones that are
designated for calling emergency or “hotline” numbers.
Refer to Cisco Unified Communications
Manager System Guide, “SIP Dial Rules
Configuration” chapter.
Privacy Prevents users who share a line from adding themselves
to a call and from viewing information on their phone
screens about the call of the other user.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP
Phones” chapter.
• Cisco Unified Communications Manager
Features and Services Guide “Barge and
Privacy” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference