Cisco 880 Series User Manual

1-10
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-12
Chapter 1 Product Overview
Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E-K9, and Cisco 860VAE-POE-W-A-K9 ISRs
Table 1-6 describes the LED indicators.
Table 1-6 Front Panel LED Indicators
LED LED Color LED Activity Description
Left Side
DSL ACT Green Flashing DSL WAN activity. Faster flashing indicates heavier
traffic.
Off — Device is powered off.
or
No DSL WAN activity.
DSL LINK Green Solid DSL WAN mode is selected and DSL training is complete.
Flashing DSL WAN mode is selected but DSL LinkUp state is
incomplete, such as in-training (slow initially, fast when
almost connected).
Off — Device is powered off.
or
GE WAN mode is selected.
GE ACT Green Flashing GE WAN activity (traffic in either direction). Faster
flashing indicates heavier traffic.
Off — Device is powered off.
or
No GE WAN activity.
or
No link.
GE MODE Green Solid GE WAN mode is selected.
Off — Device is powered off.
or
DSL WAN mode is selected.
Right Side
WLAN Green Solid WLAN enabled.
Flashing Indicates WLAN activity (traffic in either direction).
Off — Device is powered off.
or
WLAN is disabled.
Power Green Solid On—The device is powered on.
Off — Device is powered off.

Cisco 880 Series Specifications

General

Operating System	Cisco IOS
Device Type	Router
LAN Ports	4
LAN Interface	Fast Ethernet
VPN Support	Yes
Security	Yes
Firewall	Yes
Data Link Protocol	Ethernet, Fast Ethernet
Network / Transport Protocol	TCP/IP
Remote Management Protocol	SNMP, CLI, HTTP, HTTPS, Telnet, SSH
Features	Quality of Service (QoS), VLAN support, firewall
Encryption Algorithm	DES, Triple DES, AES
Authentication Method	RADIUS, TACACS+
Compliant Standards	IEEE 802.1Q
RAM	256 MB
Memory	256 MB DRAM