Cisco 880 Series User Manual

A-5
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-12
Appendix A Technical Specifications
Power Supply
Power Supply
Table A-4 lists the maximum input values for the power supply used with the Cisco 860, 880, 890 series
ISRs.
Wireless Access Point
Table A-5 lists the specifications for the wireless access point (AP).
Wireless LAN
Radio technology IEEE 802.11n draft 2.0 standard compliant.
Backward compatible with 802.11b/g.
Operating Frequency 2.4 GHz radio band
Bandwidth 20 MHz
Channels Country-specific:
America SKU(-W-A): Channels 1–11
Europe SKU(-W-E): Channels 1–13
Table A-3 Technical Specifications
Description Specification
Table A-4 Maximum Input Values for the power supply used with Cisco 860, 880, 890 series ISRs
Power Supply Unit 100 Volt 240 Volt
30 W 1 Ampere 0.5 Ampere
60 W 1.5 Ampere 0.7 Ampere
Table A-5 Wireless Access Point Specifications
Description Design Specification
Radio technology IEEE 802.11n draft 2.0 standard compliant. 2x3 MIMO
1
radio. Backward
compatible with 802.11b/g and 802.11a (Cisco 890 series routers).
1. MIMO = Multiple Input/Multiple Output.
Operating frequency
Cisco 860 series and 880 series ISRs
2.4-GHz radio band
Cisco 890 series ISRs
2.4 and 5-GH radio bands
Channels Country-specific 20 and 40 MHz
PHY Data rate 802.11b up to 11 Mb/s
802.11g up to 54 Mb/s
802.11n up to 300 Mb/s

Cisco 880 Series Specifications

General

Operating System	Cisco IOS
Device Type	Router
LAN Ports	4
LAN Interface	Fast Ethernet
VPN Support	Yes
Security	Yes
Firewall	Yes
Data Link Protocol	Ethernet, Fast Ethernet
Network / Transport Protocol	TCP/IP
Remote Management Protocol	SNMP, CLI, HTTP, HTTPS, Telnet, SSH
Features	Quality of Service (QoS), VLAN support, firewall
Encryption Algorithm	DES, Triple DES, AES
Authentication Method	RADIUS, TACACS+
Compliant Standards	IEEE 802.1Q
RAM	256 MB
Memory	256 MB DRAM