Cisco 8845 Administration Guide

DescriptionParameter
Specifies the credentials to use for profile account
authentication. The available options are:
• Disabled: Disables the profile account feature.
When this feature is disabled, the Profile
account setup menu doesn't display on the phone
screen.
• Basic HTTP Authentication: The HTTP login
credentials are used to authenticate the profile
account.
• XSI Authentication: XSI login credentials or
XSI SIP credentials are used to authenticate the
profile account. The authentication credentials
depend on the XSI Authentication Type for the
phone:
• When the XSI Authentication Type for
the phone is set to Login Credentials, the
XSI login credentials are used.
• When the XSI Authentication Type for
the phone is set to SIP Credentials, the XSI
SIP credentials are used.
Default: Basic HTTP Authentication
Profile Authentication Type
Each profile rule informs the phone of a source from
which to obtain a profile (configuration file). During
every resync operation, the phone applies all the
profiles in sequence.
Default: /$PSN.xml
If you are applying AES-256-CBC encryption to the
configuration files, specify the encryption key with
the --key keyword as follows:
[--key <encryption key>]
You can enclose the encryption key in double-quotes
(") optionally.
Profile Rule
Profile Rule B
Profile Rule C
Profile Rule D
DHCP options, delimited by commas, used to retrieve
firmware and profiles.
Default: 66,160,159,150,60,43,125
DHCP Option To Use
DHCP options, delimited by commas, used to retrieve
firmware and profiles.
Default: 17,160,159
DHCPv6 Option To Use
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
287
Cisco IP Phone Troubleshooting
Configuration Profile

Cisco 8845 Specifications

General

Camera	No
Audio	Wideband audio
Speakerphone	Yes
Wi-Fi	No
Display	5-inch color display
Resolution	480 x 272 pixels
Ethernet	10/100/1000 Mbps
PoE	IEEE 802.3af/at
Protocols	SIP
Codecs	G.711, G.722, G.729a, iLBC
USB Ports	2 x USB 2.0