Name: Cisco 8865
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Before you begin

Obtain two Phillips head screwdrivers or other similar devices that have a diameter of 5 millimeters or 3/16ths

of an inch.

Procedure

Step 1 Insert a screw driver or other device into the left and right holes in the phone mounting plate. Insert to a depth

of about 3/4 of an inch or 2 centimeters.

Step 2 Press firmly inwards to disengage the tabs.

Step 3 Lift the phone to release it from the wall bracket. Pull the phone toward you.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the

handset rest to ensure that the receiver does not slip out of the cradle.

Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide

136

Hardware and Accessory Installation

Adjust the Handset Rest

Other manuals for Cisco 8865

Questions and Answers:

Need help?

Do you have a question about the Cisco 8865 and is the answer not in the manual?

General