Enable Call Forwarding on User Tab
Perform the following task if you want to give a user the ability to modify the call forward settings from the
Configuration Utility page.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > User.
Step 2 Under Call Forward, choose Yes for CFWD Setting.
Step 3 Click Submit All Changes.
Enable Conferencing
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Phone.
Step 2 Under Supplementary Services, choose Yes in the Conference Serv drop-down list box.
Step 3 Click Submit All Changes.
Enable Remote Call Recording with SIP REC
You can enable call recording on a phone so that your user can record an active call. The recording mode
configured on the server controls the display of the recording softkeys for each phone.
Table 20: Recording Mode and Recording Softkeys
Recording Softkeys Available on the PhoneRecording Mode in Server
No softkeys available.
Your user can't control recording from the phone. Recording starts automatically
when a call is connected.
Always
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
155
Cisco IP Phone Administration
Enable Call Forwarding on User Tab
To Next Page
Loading...
Need help?
General
