Cisco 8945 - Mute a Call

Step 2
The party will be put on hold.
Make note of the park number assigned to your call.
Step 3
From another UW-Whitewater
Cisco phone, dial the
park number assigned to your phone.
You will now be placed into the original call.
NOTE: A call will only remain on park for 60 seconds. After 60 seconds, the call will ring again on the
originating phone.
Mute a Call
Step 1
While on an active call, press the Mute button on your
phone. The Mute button lights red, indicating that the
other party cannot hear you.
To deactivate the mute function, do one of the
following:
• Press the (Mute) button again.
• Lift the handset if you are using mute with your
speakerphone.
9