What to do next
Figure 62: SPA Installation and Removal
Optical Device Installation and Removal
Any contamination of the fiber connection can cause failure of the component or failure of the whole system.
A particle that partially or completely blocks the core generates strong back reflections, which can cause
instability in the laser system. Inspection, cleaning, and reinspection are critical steps to take before making
fiber-optic connections.
Cleaning Optical Devices
Refer to the Inspection and Cleaning Procedures for Fiber-Optic Connections document for information on
cleaning optical devices.
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
95
Installing and Removing a Shared Port Adapter
Optical Device Installation and Removal
To Next Page
Loading...
