CHAPTER 3
Secure Domain Routers on the Cisco ASR 9000
Series Router
Secure domain routers (SDRs) are a means of dividing a single physical system into multiple logically
separated routers. Cisco ASR 9000 Series Routers are single-shelf routers that only support one SDR—the
owner SDR.
Table 4: Feature History for Secure Domain Routers on Cisco IOS XR Software
ModificationRelease
This feature was introduced.Release 3.7.2
This module contains the following topics:
•
Prerequisites for Working with Secure Domain Routers, page 13
•
Information About Configuring Secure Domain Routers, page 14
•
Additional References, page 17
Prerequisites for Working with Secure Domain Routers
Initial Setup
•
The router must be running the Cisco IOS XR software .
•
The root-system username and password must be assigned as part of the initial configuration.
•
For more information on booting a router and performing initial configuration, see Cisco ASR 9000
Series Aggregation Services Router Getting Started Guide.
Required Cards for Each SDR
•
Route switch processor (RSP) pair must be installed for the SDR.
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
13
To Next Page
Loading...
Need help?
General
