Example: 1P Data Path configuration
This example shows the Data Path configuration details:
onep
transport tcp port 15001
datapath transport vpathudp sender-id 1
To check for the running service node:
show run int gigEth 0/0/0/0
service-policy type pbr input onep-pmap-1
service-node ONEP_1
destination-port 19999 ==> LOCAL_PORT from dpss.conf
encapsulation udp
source-port 6633
service-endpoint-ip 192.168.2.102 ==> LOCAL_IP from dpss.conf
my-sender-id 1
endpoint-sender-id 1
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
271
Implementing OnePK
Example: 1P Data Path configuration
To Next Page
Loading...
Need help?
General
