Configuring Syslog Throttling
This task is used to enable or disable Call Home syslog message throttling and avoid sending repetitive Call
Home syslog messages.
SUMMARY STEPS
1.
configure
2.
call-home
3.
syslog-throttling
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters call home configuration submode.call-home
Example:
RP/0/RSP0/CPU0:router (config) # call-home
Step 2
Enables or disables Call Home syslog message throttling
and avoids sending repetitive Call Home syslog messages.
By default, syslog message throttling is enabled.
syslog-throttling
Example:
RP/0/RSP0/CPU0:router (config-call-home) #
syslog-throttling
Step 3
Enabling AAA Authorization
This task is used to enable AAA authorization for Call Home messages.
SUMMARY STEPS
1.
configure
2.
call-home
3.
aaa-authorization [ username username]
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
322
Configuring Call Home
Configuring Syslog Throttling
To Next Page
Loading...
Need help?
General
