EasyManua.ls Logo

Cisco Aironet 1300 Series - IEEE 802.11 G (2.4-Ghz Band

Cisco Aironet 1300 Series
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D-3
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
OL-5048-02
Appendix D Channels and Antenna Settings
Maximum Power Levels and Antenna Gains
Maximum Power Levels and Antenna Gains
IEEE 802.11g (2.4-GHz Band)
An improper combination of power level and antenna gain can result in equivalent isotropic radiated
power (EIRP) above the amount allowed per regulatory domain. Table D-2 indicates the maximum
power levels and antenna gains allowed for each IEEE 802.11g regulatory domain.
Note To meet regulatory restrictions, the external antenna bridge unit and the external antenna must be
professionally installed. The network administration or other IT professional responsible for installing and
configuring the unit is a suitable professional installer. Following installation, access to the unit should be
password protected by the network administrator to maintain regulatory compliance.
Table D-2 Maximum Power Levels Per Antenna Gain for IEEE 802.11g
Regulatory Domain Antenna Gain (dBi)
Maximum Power Level (mW)
CCK OFDM
Americas (–A)
(4 W EIRP maximum)
5.2 (Omni) 100 30
9 (Patch) 100 30
10 (Yagi) 100 30
11 (Omni)
12 (Omni) 100 30
13 (Integrated patch) 100 30
13.5 (Yagi) 100 30
14 (Sector) 50 20
21 (Dish) 20 10
EMEA (–E)
(100 mW EIRP maximum)
5.2 (Omni) 20 10
9 (Patch) 10 5
10 (Yagi) 10 5
11 (Omni)
12 (Omni) 5 1
13 (Integrated patch) 5 1
13.5 (Yagi) 5 1
14 (Sector) 1 1
21 (Dish) 1
1

Table of Contents

Other manuals for Cisco Aironet 1300 Series

Related product manuals