Cisco Aironet 1300 Series - Point-To-Multipoint Bridge Configuration; Access Point Configuration

1-8
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
OL-5048-02
Chapter 1 Overview
Network Configuration Examples
Point-to-Multipoint Bridge Configuration
The point-to-multipoint bridge configuration (Figure 1-6) connects the main LAN network to multiple
remote LAN networks. Wireless devices can also connect to the root bridge.
Figure 1-6 Point-to-Multipoint Bridge Configuration
Access Point Configuration
When configured in access point mode, the unit can support remote workgroup bridges and local
wireless client devices (see Figure 1-7). The access point/bridge defaults to a root access point role.
Figure 1-7 Access Point Configuration
The access point configuration allows the wireless devices and the Ethernet-enabled wired devices using
the workgroup bridge to pass Ethernet traffic to and from the main LAN.
117021
117075
Access
point
Workgroup
bridge