Cisco Aironet 1300 Series - Assigning Basic Settings

5-5
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
OL-5048-02
Chapter 5 Configuring the Access Point/Bridge for the First Time
Assigning Basic Settings
Assigning Basic Settings
After you obtain the access point/bridge IP address, you can browse to its Express Setup page and
perform an initial configuration. Follow these steps:
Step 1 Browse to the access point/bridge IP address. An Enter Network Password window displays.
Step 2 Enter the case-sensitive username Cisco in the Username field.
Step 3 Enter the case-sensitive password Cisco in the Password field and press Enter. The Summary Status
page displays, which is the access point/bridge home page (see Figure 5-1).
Figure 5-1 Summary Status Page