Cisco ASR 9000 Series Installation Guide

Figure 118: Correct Lifting Positions
Do not grasp the card cage or the air inlet grill when lifting the router chassis (see the figure below).
Caution
Figure 119: Incorrect Lifting Handholds
Step 2 Position the chassis until the rack-mounting flanges are flush against the mounting rails on the rack.
Step 3 Hold the chassis in position against the mounting rails while the second person finger-tightens a screw to the
rack rails on each side of the chassis.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
112
Unpacking and Installing the Chassis
Installing the Chassis in a 2-Post Rack

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model