Cisco ATA 186 Administrator's Guide

6-4
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide H.323
OL-4008-01
Chapter 6 Call Commands
Syntax
Input Sequence Identifiers
Action Identifiers
Table 6-2 Input Sequence Identifiers
Identifier Input Sequence
0-9,#* DTMF digits
f hook flash
ooff-hook
@ anytime; for example, @f means anytime hook-
flash occurs
h on-hook
S#|*
N 0|1|2|3|4|5|6|7|8|9
DN|S
v a variable number (1 or more) of characters
from the above list. It must be followed by a
character which acts as the terminator of this
variable part.
Table 6-3 Action Identifiers
Identifier Action
A NONE
B Seizure (User intends to dial or configure)
C Continue to dial
D Call Return
E Hold the active call
F Retrieve the waiting call
G Cancel the call attempt
H Disconnect the call
I Blind transfer the call to the number
N Go to configuration mode
O Release the call
P Answer the incoming call
Q Transfer with consultation
R Say busy to the caller
aNone
b Forward all calls to the given number

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports