Cisco ATA 186 Administrator's Guide

5-20
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Chapter 5 Parameters and Defaults
Operating Parameters
Related Parameters
• RxCodec, page 5-21
• TxCodec, page 5-22
Value Type
Integer
Range
0 or 3
Default
0
Voice Configuration Menu Access Code
300
Related Parameters
• AudioMode, page 5-20—Bits 1 and 17
• TxCodec, page 5-22
• RxCodec, page 5-21
• NumTxFrames, page 5-23
AudioMode
Description
This parameter represents the audio operating mode. The lower 16 bits are for the Phone 1 port, and the
upper 16 bits are for the Phone 2 port. Table 5-1 on page 5-21 provides definitions for each bit.
Value Type
Bitmap
Default
0x00150015
Voice Configuration Menu Access Code
312
Related Parameters
• LBRCodec, page 5-19
• ConnectMode, page 5-28
• RxCodec, page 5-21

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports