Cisco ATA 186 Administrator's Guide

B-3
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Appendix B Voice Menu Codes
Rx codec 36 Selects the audio codec type to use to decode
received data. The call-receiving station
automatically adjusts to the call-initiating station's
audio codec type if the call-receiving station
supports that audio codec.
Set password 7387277 Configuration interface password
Signal timers 318 Timeout values controlling the starting or stopping
of a signaling event
H.323 max number of redirects 205 Maximum number of redirections the Cisco ATA
will attempt to reach a callee when making a call
Subnet mask 10 Specifies the subnet mask for the Cisco ATA
TFTP URL 905 IP address of the TFTP server when TFTP
configuration is used
Timezone 302 Specifies offset to GMT—used to time-stamp
incoming calls for caller ID
ToConfig 80001 Identifies unconfigured or already-configured
Cisco ATAs
Trace Fflags 313 Enables logging of debug information
Tx Codec 37 Selects transmitting audio codec preference
UDP TOS bits 255 Determines the precedence and delay of UDP IP
packets
UID 0 3 User ID (telephone number) for the PHONE 1 port
UID 1 13 User ID (telephone number) for the PHONE 2 port
Use login ID 93 Determines which pair (UIDx, PWDx or LoginIDx,
PWDx) to use for authentication
Use TFTP 305 Enables TFTP as configuration method
Table B-2 Cisco ATA Voice Menu Codes—Configuration Parameters (continued)
Option
Voice Menu
Code Description

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports