Cisco ATA 186 Administrator's Guide

Contents
vii
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
TimeZone 5-29
NTPIP 5-30
AltNTPIP 5-30
DNS1IP 5-31
DNS2IP 5-31
UDPTOS 5-31
SigTimer 5-32
OpFlags 5-33
VLANSetting 5-34
Optional Feature Parameters 5-35
NPrintf 5-35
RingOnOffTime 5-36
IPDialPlan 5-36
DialPlan 5-37
About Dial Plan Commands 5-38
Dial Plan Blocking (In Rule) 5-39
'H' Rule to Support Hotline/Warmline 5-40
'P' Rule to Support Dial Prefix 5-40
Call-Progress Tone Parameters 5-41
List of Call-Progress Tone Parameters 5-41
Tone Parameter Syntax 5-41
How to Calculate Scaling Factors 5-42
Recommended Values 5-42
Specific Call-Progress Tone Parameter Information 5-43
CallCmd 5-46
CHAPTER 6 Call Commands 6-1
Call Command Structure 6-1
Syntax 6-2
Context-Identifiers 6-3
Input Sequence Identifiers 6-4
Action Identifiers 6-4
Call Command Example 6-5
Call Command Behavior 6-7
CHAPTER 7 Configuring and Debugging Fax Services 7-1
Using Fax Pass-through Mode 7-1
Configuring the Cisco ATA for Fax Pass-through mode 7-2
AudioMode 7-2

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports