Cisco ATA 186 Administrator's Guide

Contents
ix
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Contacting TAC 9-7
APPENDIX A Using H.323 Supplementary Services A-1
Changing Call Commands A-1
Cancelling a Supplementary Service A-1
Common Supplementary Services A-1
Caller ID A-2
Call-Waiting Caller ID A-2
Making a Conference Call in the United States A-2
Making a Conference Call in Sweden A-3
Call Waiting in the United States A-3
Call Waiting in Sweden A-3
Calling Line Identification Presentation A-3
About Calling Line Identification Restriction A-4
Calling Line Identification Restriction in the United States A-4
Calling Line Identification Restriction in Sweden A-4
APPENDIX B Voice Menu Codes B-1
APPENDIX C Cisco ATA Specifications C-1
Physical Specifications C-1
Electrical Specifications C-2
Environmental Specifications C-2
Immunity Specifications C-2
Physical Interfaces C-3
Ringing Characteristics C-3
Software Specifications C-3
APPENDIX D H.323 Signaling D-1
Supported H.323 Messages D-1
H.323 Signaling Scenarios D-2
H.323 Endpoint-to-Gatekeeper Registration D-2
H.323 Endpoint-to-Endpoint Call Setup with a Common Gatekeeper D-5
H.323 Call Setup from H.323 Network to Circuit Switched Network D-14
G LOSSARY
I NDEX

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports