10-95% (non-condensing)Relative humidity
Up to 10,000 ft (3,000 m)Altitude
•
PWR-C2-250WAC: 2.5 lb (1.1 kg)
•
PWR-C2-640WAC: 3.1 lb (1.4 kg)
•
PWR-C2-1025WAC: 3.4 lb (1.6 kg)
Weight
•
PWR-C2-250WAC:1.58 x 10.22 x 3.75 in. (3.5 x 26 x 9.53 cm)
•
PWR-C2-640WAC: 1.58 x 10.22 x 3.75 in. (3.5 x 26 x 9.53 cm)
•
PWR-C2-1025WAC: 1.58 x 11.72 x 3.75 in. (3.5 x 29.8 x 9.53 cm)
Dimensions shown exclude the extraction handle, which measures
1.55 in. (3.9 cm).
Note
Dimensions
Specifications for the Catalyst 2960-X Switches
Table 19: Catalyst 2960X-48FPD-L, 2960X-48LPD-L, 2960X-24PD-L, 2960X-48FPS-L, 2960X-48LPS-L, 2960X-24PSQ-L, and
2960X-24PS-L Switch Specifications
Power Requirements
100 to 240 VAC (autoranging)
• 9 to 4 A, 50 to 60 Hz (Catalyst 2960X-48FPD-L)
•
5 to 2 A, 50 to 60 Hz (Catalyst 2960X-48LPD-L)
• 5 to 2 A, 50 to 60 Hz (Catalyst 2960X-24PD-L)
•
9 to 4 A, 50 to 60 Hz (Catalyst 2960X-48FPS-L)
• 5 to 2 A, 50 to 60 Hz (Catalyst 2960X-48LPS-L)
•
5 to 2 A, 50 to 60 Hz (Catalyst 2960X-24PS-L)
•
2 to 4 A, 50 to 60 Hz (Catalyst 2960X-24PSQ-L)
AC input voltage
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
70 OL-28309-02
Technical Specifications
Specifications for the Catalyst 2960-X Switches
To Next Page
Loading...
Need help?
General