Cisco Catalyst 250 Series User Manual

Monitoring the SSH Configuration and Status
This table displays the SSH server configuration and status.
Table 15: Commands for Displaying the SSH Server Configuration and Status
PurposeCommand
Shows the version and configuration information for
the SSH server.
show ip ssh
Shows the status of the SSH server.show ssh
Additional References
Related Documents
Document TitleRelated Topic
Session Aware Networking Configuration Guide,
Cisco IOS XE Release 3SE (Catalyst 3850 Switches)
http://www.cisco.com/en/US/docs/ios-xml/ios/san/
configuration/xe-3se/3850/san-xe-3se-3850-book.html
Configuring Identity Control policies and Identity
Service templates for Session Aware networking.
Securing User Services Configuration Guide Library,
Cisco IOS XE Release 3SE (Catalyst 3850 Switches)
http://www.cisco.com/en/US/docs/ios-xml/ios/
security/config_library/xe-3se/3850/
secuser-xe-3se-3850-library.html
Configuring RADIUS, TACACS+, Secure Shell,
802.1X and AAA.
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Standards and RFCs
TitleStandard/RFC
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 121
Configuring Secure Shell (SSH)
Monitoring the SSH Configuration and Status

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English